semi automatic turnstiles access control system

1,IC,ID carding reading. 2,Stainless steel material 3,Good machanical working 4,Durable use,remote control

1, Dimensions: Length 450 × 280 × 1000 (mm)

2,Weight: 35KG3, gate rod length: 500 (mm)4,brake lever steering: one-way, two-way (optional)5the whole system running smoothly, low noise, no mechanical shock.6,Have self-test function, and automatic recovery in the locked state.7, has a variety of operating modes to choose from, you can two-way card reader, while reader, another direction of the forbidden line, while reader, free passage of another direction, and the mode of operation of the gates through the motherboard menu set given.8, When power off the pole automatic down, power connecting the pole can reset by hand.9, has a remote control 485 system function to meet the special needs of users and the fire safety requirements.10,with a unified, standard external electrical interface with a variety of read-write device is mounted, easy system integration, remote control and management and through the management computer.10,has a card reader with memory and without memory function, and users can set their own needs through the motherboard keyboard.11,through the software settings may limit the total number of sites within to meet the special needs of some special occasions.12,with automatic reset function. Reader after the passage of the passage is not within the stipulated time, the system will automatically cancel the passage by the access rights, and the passage time limit set by the management.main technical parameters1) Power voltage: AC220V ± 10V, 50Hz2) Working ambient temperature: -15 °C ~ 60 °C3) Relative humidity: less than 95%, no condensation4) The maximum channel width 600mm5) Pass speed: 20 / min (IC card)6) Input Interface: +12 V level signal or pulse width> 100ms DC12V pulse signal drive current> 10mA7) Communication Interface: RS485 electrical standards, communication distance: ≤ 1200 meters

semi automatic turnstiles access control system